INSTALLING MOWER
Attaching Front Mower Links To Mower
1.Screw the adjustable plate link onto the right and left front mower links. Adjust the plate link as shown in illustration, so that the straight line length is 450 mm (17.75 in). Face the plate link to the outside as shown and insert into the projecting brackets on the mower deck .
2.Install both right and left links. Secure with 16 mm greased clevis pin inserting pin from out-
side. Insert linchpin to lock.
Front Mower Links
INSTALLING MOWER TO TRACTOR
1.Adjust gauge wheels to lowest cutting position.
2.Chock right and left front wheels as shown.
3.Start the tractor and keep engine at low idling speed. Set the lift control lever to the "UP" position and keep the lift arm up.
Drive front wheels over the flat area of the pulley covers only! Avoid run- ning over gear box, drive shaft and rear links to prevent damaging them.
Front Wheels Chocked
2 1
