INSTALLING MOWER

Installing Discharge Chute Cover

1..Using3/8 x 1 in. carriage bolts, insert bolts from

. under mower deck, passing through holes in deck and discharge chute.

2. Secure with 3/8 in. flange locknuts.

I

Discharge Chute

Y

Level Plug

Gearbox

Gear Box

Installing Gear Box Oil and Vent Plug

Gearbox is shipped WITHOUT oil. Plastic gearbox vent plug comes in burlap bag with other mower assembly parts.

1 - 1 Before operating mower, check gearbox and fill if necessary with SAE 9OW gear lube. Operating without oil will severely damage gearbox.

1.Remove level plug.

2.Add oil until it seeps out level plug hole.

3.Allow several minutes for oil to flow through bearings and refill as necessary.

4.Install both plugs

2 0

Page 22
Image 22
Honda Power Equipment MM60 manual Remove level plug Add oil until it seeps out level plug hole, Install both plugs