![](/images/new-backgrounds/1099503/9950335x1.webp)
SET-UP AND ASSEMBLY
Subassembling Front Link Brackets
Assemble by compressing the front spring and inserting it in the front bracket slot. Pass greased front quick release pin through hole in the front bracket and spring. Pull back spring slightly to uncover hole in quick release pin. Use hammer to tap in spring pin until it is equidistant from both sides of quick release pin.
NOTE: Hold back bottom of spring so that pin clears it.
Assemble both right and left brackets.
Front Link Bracket
Mounting Front Link Bracket to.Tractor
1. From bottom, slip the assembled front mount- ing bracket up onto the front frame rails.
2. Insert 8 flange bolts 12 mm x 30 mm. Tighten all to 6
NOTE: With pins correctly installed, they will face rearward and downward when front link bracket is installed on the tractor.
Front Link Bracket
Assembling Rear Link Bracket
Insert the greased rear quick release pin in the mounting bracket attached to the tractor frame. It is located beneath the tractor along the
Rear Link Brackef
16