Honeywell 1250G UPC-AAddenda, Addenda Timeout, UPC-AAddenda Required, Required, Required, * Not Required, 2 Digit Addenda On, 5 Digit Addenda On, * 2 Digit Addenda Off

UPC-A Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-A data. Default = Off for both 2 Digit and 5 Digit Addenda.

2 Digit Addenda On* 2 Digit Addenda Off5 Digit Addenda On* 5 Digit Addenda OffUPC-A Addenda Required

When Required is scanned, the scanner will only read UPC-A bar codes that have addenda. You must then turn on a 2 or 5 digit addenda listed on page 6-35. Default = Not Required.

Required

* Not Required

Addenda Timeout

You can set a time during which the scanner looks for an addenda. If an addenda is not found within this time period, the data can be either transmitted or discarded, based on the setting you are using for UPC-A Addenda Required (see page 6-35). Set the length (in milliseconds) for this

6 - 35