![](/images/backgrounds/161173/161173-24660x1.png)
The beeper duration codes modify the length of the beep the scanner emits on a good read. Default = Normal.
* Normal BeepShort BeepNumber of Beeps – Good ReadThe number of beeps of a good read can be programmed from 1 - 9. The same number of beeps will be applied to the beeper and LED in response to a good read. For example, if you program this option to have five beeps, there will be five beeps and five LED flashes in response to a good read.
The beeps and LED flashes are in sync with one another.
Note: The LEDs can also be programmed separately. See LED Settings on page
To change the number of beeps, scan the bar code below and then scan a digit
The number of beeps and LED flashes emitted by the scanner for a bad read or error can be programmed from 1 - 9. For example, if you program this option to have five error beeps, there will be five error beeps and five LED flashes in response to an error.
Note: The LEDs can also be programmed separately. See LED Settings on page
3 - 4