Honeywell 1250G <Default All Code 128 Settings, Code 128 On/Off, Code 128 Redundancy, 128 Group Separator Output, Off, * On, Code, * Off

Code 128

<Default All Code 128 Settings>

Code 128 On/Off

* On

Off

128 Group Separator Output

If you wish to transmit the group separator characters “GS” (0x1D hex) with your Code 128 bar code output, scan the On bar code. When Off is scanned, the group separator is not output. Default =Off.

On

* Off

Code 128 Redundancy

If you are encountering errors when reading Code 128 bar codes, you may want to adjust the redundancy count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redundancy, scan the Code

6 - 23