Honeywell 1250G Trigger Settings, Manual Activation Laser Timeout, In-Stand, Out-of-Stand, Release In-Stand, Good Read In-Stand, Release Out-of-Stand, Good Read Out-of-Stand

good read. If you scan Do Not End Manual Activation After Good Read, the laser remains on after a good read, but the trigger must be pressed to scan the next bar code. Default = End Manual Activation After Good Read.

Do Not End Manual ActivationAfter Good Read In-Stand* End Manual Activation AfterGood Read In-Stand

Do Not End Manual Activation

After Good Read Out-of-Stand

* End Manual Activation After

Good Read Out-of-StandManual Activation Laser Timeout -Trigger Settings

You can set a timeout for the length of time the laser remains on and attempting to decode bar codes when the trigger is held down, and after it is released. Set the length (in milliseconds) for a timeout by scanning one of the bar codes below, then setting the timeout (from 1-65535 millisec- onds) by scanning digits from the Programming Chart, then scanning Save. Default = Trigger Hold In-Stand 5000 ms, Trigger Hold Out-of-Stand 30000 ms, Trigger Release In or Out-of-Stand 0.

Laser Timeout - Trigger Hold

In-Stand

Laser Timeout - TriggerRelease In-Stand

Laser Timeout - Trigger Hold

Out-of-Stand

Laser Timeout - Trigger

Release Out-of-Stand

3 - 10