Honeywell 1250G Manual Activation Mode, End Manual Activation After Good Read, In-Stand, In-Stand, Out-of-Stand, Out-of-Stand, Out-of-Stand, Presentation Mode

Presentation Mode with CodeGate® Out-of-Stand: When the scanner is not in the stand, it automatically detects bar codes and decodes them. However, the data is not transmitted until you pull the trigger. The laser remains on briefly after the transmission. (If you are accustomed to a Voyager 9540, this setting is the same as the 9540’s default.)

Presentation ModeOut-of-StandPresentation Mode withCodeGate Out-of-StandManual Activation Mode

In Manual Activation Mode, you must pull the trigger to scan a bar code. The scanner scans until a bar code is read, or until the trigger is released. Default = Manual Activation Mode Off In-Stand, Manual Activation On Out- of-Stand.

Manual Activation Mode OffIn-Stand* Manual Activation Mode On

In-Stand

Manual Activation Mode Off

Out-of-Stand

* Manual Activation Mode On

Out-of-Stand

End Manual Activation After Good Read

After a bar code is successfully read, the laser can be programmed either to remain on and scanning, or to turn off. When End Manual Activation After Good Read is enabled, the laser turns off and stops scanning after a

3 - 9