7

Symbologies

This programming section contains the following menu selections. Refer to Chapter 10 for settings and defaults.

All Symbologies

Interleaved 2 of 5

Aztec Code

Korea Post

China Post (Hong Kong 2 of 5)

Matrix 2 of 5

Chinese Sensible (Han Xin) Code

MaxiCode

Codabar

MicroPDF417

Codablock A

MSI

Codablock F

NEC 2 of 5

Code 11

Postal Codes - 2D

Code 128

Postal Codes - Linear

Code 32 Pharmaceutical (PARAF)

PDF417

Code 39

GS1 DataBar Omnidirectional

Code 93

QR Code

Data Matrix

Straight 2 of 5 IATA (two-bar start/stop)

EAN/JAN-13

Straight 2 of 5 Industrial (three-bar start/stop)

EAN/JAN-8

TCIF Linked Code 39 (TLC39)

GS1 Composite Codes

UPC-A

GS1 DataBar Expanded

UPC-A

GS1 DataBar Limited

UPC-A/EAN-13 with Extended Coupon Code

GS1 DataBar Omnidirectional

UPC-E0

GS1 Emulation

UPC-E1

GS1-128

 

 

All Symbologies

If you want to decode all the symbologies allowable for your scanner, scan the All Symbologies On code. If on the other hand, you want to decode only a particular symbology, scan All Symbologies Off followed by the On symbol for that particular sym-

bology.

All Symbologies On

All Symbologies Off

Note: When All Symbologies On is scanned, 2D Postal Codes are not enabled. 2D Postal Codes must be enabled separately.

Message Length Description

You are able to set the valid reading length of some of the bar code symbologies. If the data length of the scanned bar code doesn’t match the valid reading length, the scanner will issue an error tone. You may wish to set the same value for minimum and maximum length to force the scanner to read fixed length bar code data. This helps reduce the chances of a misread.

EXAMPLE: Decode only those bar codes with a count of 9-20 characters.

Min. length = 09Max. length = 20

7 - 1