If you wish to output the total number of bar codes scanned when in Batch Mode, scan Total Records.
Total Records
Delete Last CodeIf you want to delete the last bar code scanned when in Batch Mode, scan Delete Last Code.
Delete Last Code
Clear All CodesIf you want to clear the scanner’s buffer of all data accumulated in Batch Mode, scan Clear All Codes.
Clear All Codes
Transmit Records to HostIf you are operating in Inventory Batch Mode (see Inventory Batch Mode on page
Transmit Inventory Records
Batch Mode Transmit DelaySometimes when accumulated scans are sent to the host system, the transmission of those scans is too fast for the application to process. To program a transmit delay between accumulated scans, scan one of the following delays. Default = Off.
Note: In most cases, a short (250 ms (milliseconds)) delay is ideal, however, longer delays may be programmed. Contact Technical Support (page
*Batch Mode Transmit Delay Off (No Delay)
Batch Mode Transmit Delay Short
(250 ms)
3 - 17