Honeywell 1450g, 1452g Off, * Off, * Centering Off, Top of Centering Window, Left of Centering Window, Right of Centering Window, Bottom of Centering Window

* Centering OffTop of Centering WindowBottom of Centering WindowLeft of Centering WindowRight of Centering Window

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If using an EZConfig-Scanning Tool Scan Data Window (see page 9-2), an “NR” appears when a code cannot be read. If No Read is turned Off, the “NR” will not appear.

Default = Off.

On

* Off

If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the output message (see Data Formatting beginning on page 6-1). The hex code for the No Read symbol is 9C.

4 - 15