Coupon GS1 DataBar Output
If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the data from the GS1 DataBar code. Scan the GS1 Output On code below to scan and output only the GS1 DataBar code data. Default = GS1 Out-
put Off.
* GS1 Output OffGS1 Output On
<Default All UPC-E Settings>
Most U.P.C. bar codes lead with the 0 number system. To read these codes, use the
read codes that lead with the 1 number system, use
On
* Off
7 - 20