Wincor Nixdorf Beetle™ Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. This bar code sets the baud rate to 115200 bps and the data format to 8 data bits, no parity, 1 stop bit. The following prefixes are programmed for each symbology:
Symbology | Prefix | Symbology | Prefix |
Aztec Code | V | Interleaved 2 of 5 | I |
Codabar | N | MaxiCode | T |
Code 93 | L | MicroPDF417 | S |
Code 128 | K | PDF417 | Q |
Data Matrix | R | QR Code | U |
B | Straight 2 of 5 IATA | H | |
A | A0 | ||
GS1 DataBar | E | C | |
P | All other bar codes | M |
Wincor Nixdorf Beetle Settings
Wincor Nixdorf RS232 Mode A
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf RS232 Mode A terminal. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, odd parity, 1 stop bit. The following prefixes are programmed for each symbology:
Symbology | Prefix | Symbology | Prefix |
Code 128 | K | A | |
Code 93 | L | K | |
Codabar | N | Interleaved 2 of 5 | I |
A0 | Plessey | O | |
C | Straight 2 of 5 IATA | H | |
B | GS1 DataBar | E | |
All other bar codes | M |
|
|
Wincor Nixdorf RS232 Mode A
Settings
2 - 7