there are no custom defaults, it will reset the scanner to the factory default set- tings. Any settings that have not been specified through the custom defaults will be defaulted to the factory default settings.

Activate Custom Defaults

Note: If using a cordless system, scanning this bar code also causes both the scanner and the base or Access Point to perform a reset and become unlinked. The scanner must be placed in its base to re-establish the link. If using an Access Point, the linking bar code must be scanned. See Cordless System Operation beginning on page 3-1for additional information.

Resetting the Factory Defaults

!

This selection erases all your settings and resets the

scanner to the

original factory defaults. It also disables all plugins.

 

If you aren’t sure what programming options are in your scanner, or you’ve changed some options and want tto restore the scanner to factory default set- tings, first scan the Remove Custom Defaults bar code, then scan Activate Defaults. This resets the scanner to the factory default settings.

Remove Custom Defaults

Activate Defaults

Note: If using a cordless system, scanning the Activate Defaults bar code also causes both the scanner and the base or Access Point to perform a reset and become unlinked. The scanner must be placed in its base to reestablish the link before any setup codes are entered. If using an Access Point, the linking bar code must be scanned. See Cordless System Operation beginning on page 3-1for additional information.

The Menu Commands, beginning on page 11-5list the factory default settings for each of the commands (indicated by an asterisk (*) on the programming pages).

1 - 10