Default = Batch Mode Off.

* Batch Mode Off

Automatic Batch Mode

Inventory Batch Mode

Batch Mode Beep

When using Batch Mode, scan Batch Mode Beep On to program the scanner to click when each bar code is read to storage. Default = Batch Mode Beep On.

Batch Mode Beep Off

* Batch Mode Beep On

Batch Mode Storage

When a scanner is storing data during a Batch Mode process, you can select whether the data is stored in Flash memory or in RAM.

Flash Storage: The scanner writes any untransmitted data to flash memory prior to powering down. The data will still be there when the scanner powers back up. However, the scanner will power down, even with untransmitted data, if it reaches a power down timeout or if the battery power is very low.

3 - 17