Gilbarco® Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Gil- barco terminal. This bar code sets the baud rate to 2400 bps and the data format to 7 data bits, even parity, 2 stop bits. It also also adds a carriage return (CR) suffix and programs the following prefixes for each symbology:

Symbology Prefix

UPC-AA

UPC-EE0

EAN-8FF

EAN-13F

Gilbarco Settings

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honey- well bioptic scanner auxiliary port configuration. This bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.

Honeywell Bioptic Settings

Datalogic™ Magellan© BiopticAux Port Configuration

Scan the following Plug and Play code to program the scanner for a Data- logic Magellan bioptic scanner auxiliary port configuration. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.

Datalogic Magellan Bioptic Settings

2 - 7