System Operation (cont’d)
To Arm the System In Instant Mode and Stay Inside
In INSTANT STAY mode, the perimeter portion of your burglar alarm system is armed, but the time delays are eliminated from your normal entry/exit door(s). All interior protection is disarmed, so you are free to move around inside.
Check to make sure the system is READY. When it is ready, press:
INSTANT
followed by
STAY
followed by your User Code.
When the system has been armed successfully, the ARMED LED is on, and the following is displayed:
LCD Keypad:
ON: STAY / INS
STAY
INSTANT
NOTE: This system can be programmed by the installer for the AUTOSTAY feature which automatically bypasses interior zones if you arm the system in AWAY mode, but do not exit through a delay zone during exit time.
– 12 –
