Quick Reference
Arming the System
Check to make sure the system is ready — Green READY LED is lit. Enter your
The ARMED LED goes on.
Exit through a door designated by your installer as an exit/entry door.
Disarming the System
Enter through door designated by your installer as an exit/entry door. Enter your
The ARMED LED goes out.
Arm System/Stay Inside
Check to make sure the system is ready — Green READY LED is lit.
Press | STAY | followed by your User Code. |
|
|
|
The ARMED and STAY LEDs light.
You must disarm the system if you want to open the door or leave the premises after the exit time has passed.
Arm System/Stay Inside/Instant Mode
Check to make sure the system is ready — Green READY LED is lit.
Press
INSTANT
then
STAY
followed by your User Code.
The ARMED, INSTANT, and STAY LEDs are all lit.
Smoke Detector Reset
Enter your
– 4 –
