Power
The terminal requires 9.5 Volts DC input for communications and battery charging; the power adapter on the power cable converts the voltage from the power source to 9.5 volts DC. Only the Honeywell 9.5 VDC, 4A power supply provided with the ebase converts the voltage appropriately.
Honeywell recommends that you leave the eBase connected to its power source at all times, so that it is always ready to use.
!cables, and power adapters. Use of any
A/C Power Cord
Power
Adapter
Power Cable
1.Plug the A/C power cord into the power adapter.2.Plug the power cable into the power connector on the back of the eBase.3.Plug the A/C power cord into a standard wall outlet. The ebase is now powered. The COMM LED on the eBase flashes red.
9