Honeywell 9700 Modifying the RASMan AutoActiveSync Setting, AutoRun RASMan, OK, Yes, Yes, Yes, RASMan, RASMan, Enable, Disable, Settings, AutoActiveSync, 3.Tap Edit > Modify

7.Tap on Connection in the Key column, and then tap File > Disable.

8.Tap OK, and then tap Yes to save your changes.

Modifying the RASMan AutoActiveSync Setting

1.Tap Start > Power Tools > EZConfig Utilities > RASMan.

2.Select Settings from the folder tree, and then tap AutoActiveSync under the Key column.

3.Tap Edit > Modify.

4.Select Disable from the Value pull down menu.

5.Tap OK on the Navigation bar.

6.Tap OK, and then tap Yes to save your changes.

AutoRun RASMan

To start RASMan automatically after each soft or hard reset, enable the

RASMan Program section of the Autorun.exm file.

1.Tap Start > Power Tools > EZConfig Utilities > AutoRun.

2.Locate RASMan under the Programs list.

3.Tap and hold the stylus on RASMan.

4.Select Enable from the pop-up menu.

5.Tap OK on the Navigation bar.

6.Tap Yes to save your changes.

15