Mounting

Set the eBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the eBase.

When choosing a location, bear in mind that:

•the mounting location must allow users easy access to the Auxiliary Battery Well, and

•the Ethernet and USB ports as well as the power jack face straight out of the rear panel, and you will most likely want easy access to them in the future.

Installation HardwareScrew: 3/16 in. dia x 5/8 in. long pan head screwWasher: 1/2 in. OD x 7/32 in. ID x 3/64 in. thickNut: 3/16 in. dia

Using the DIN Rail

The DIN rail slot (7.5 X 35 mm) may be mounted on the bottom to allow for secure desk attachment of the unit if desired.

1.Slide the DIN rail slot along the bottom panel.

2.Then, using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface.

DIN Rail

(7.5 X 35 mm)

25