Honeywell 9700 DeviceConfig and RASMan Settings, Modifying the DeviceConfig.exm ActiveSync Setting, Tap, IpAddress, 4.Select Enable from the pop-upmenu

Displaying the eBase and Terminal IP Address

Once the Dolphin terminal has be successfully connected to the eBase, the terminal shares the eBase IP address.

1.Tap Start > Power Tools > Network Utilities > IPConfig.

2.On the Input tab, tap the Display full configuration button.

3.The Dolphin terminal retrieves and displays the IP configuration for the entire terminal and eBase. Locate the IpAddress field in the IP configuration list.

DeviceConfig and RASMan Settings

If your application requires frequent connecting and docking/undocking to the Ethernet, and USB communication is not required, Honeywell recommends modifying the Dolphin's DeviceConfig.exm and RASMan.exm files to the following settings.

Modifying the DeviceConfig.exm ActiveSync Setting

1.Tap Start > Power Tools > EZConfig Utilities > DeviceConfig.

2.Locate ActiveSync under the Connections list.

3.Tap and hold the stylus on ActiveSync.

4.Select Enable from the pop-up menu.

5.Tap twice on AutoConnect in the Key column.

6.Select OFF from the value pull down menu. Tap OK on the Navigation bar.

14