Manuals / Brands / Computer Equipment / Laptop / Honeywell / Computer Equipment / Laptop

Honeywell 9700 Hardware Overview, Front Panel, DOCK LED, Terminal Well, Auxiliary Battery Well

1 32

Download 32 pages, 1.8 Mb

Hardware Overview

Front Panel

Terminal Well	Auxiliary
	Battery Well
Dock LED
	COMM
	LED

AUX

Battery LED

Terminal Well

Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack. The eBase completely charges the main battery in a Dolphin terminal in

4 hours.

Auxiliary Battery Well

See Auxiliary Battery Well on page 6.

DOCK LED

The Dock LED turns solid green when the terminal is properly seated in the eBase.

Contents

Page Page Introduction Unpacking the eBase Software Requirements Applications on the Dolphin Terminal Hardware Overview Front Panel AUX Battery LED Back Panel on page This color means… Orange USB Communication Back Panel USB Port RJ45 Ethernet Port terminal Network activity DC Power Jack Bottom Panel Power Charging the Main Battery in the Terminal Ethernet Communication Setting up the eBase Connecting the Dolphin Terminal to the eBase 3.Remove the check from the box next to “Synchronize all PCs using this connection”. Tap OK . Tap 4.Insert a Dolphin terminal into the terminal well. The DOCK LED lights green 5.On the Dolphin terminal, tap Start > Power Tools Troubleshooting DeviceConfig and RASMan Settings Modifying the DeviceConfig.exm ActiveSync Setting Modifying the RASMan AutoActiveSync Setting AutoRun RASMan Configuring the Network Accessing the eBase Cradle Manager from a Host Workstation 5. The Cradle Manager window opens Changing the Password Changing the Dynamic Network Settings Changing the Static Settings USB Communication Setting Up and Connecting the Dolphin Terminal to the eBase Switching from an Ethernet to USB ActiveSync Connection Restoring the eBase Factory Defaults Upgrading the eBase Firmware Using the Cradle Manager to Upgrade the eBase Firmware 3.On your host workstation, open the web browser In the Address line, type the IP address assigned to the ebase 5.Enter the user name <Admin> and default login password <Dolphin 6.The Cradle Manager window appears 7.In the Cradle Manager window, check the box next to Firmware upgrade 8.Enter the IP address of the server in the TFTP Server IP Address field Enter the IP address of the server in the field 9.Under File Name, enter the eBase firmware upgrade file name 10.Click Apply Mounting Using the DIN Rail Technical Assistance Limited Warranty Disclaimer Trademarks Patents Page Page Honeywell Scanning & Mobility