Configuring the Network

By default, the eBase is configured to obtain IP addresses automatically via DHCP server. This means that in most cases you would simply plug-and-play the unit. If necessary, you can use the Cradle Manager configuration utility for dynamic network configuration.

Accessing the eBase Cradle Manager from a Host Workstation

1.Connect the host workstation Ethernet cable to a port on the same

Ethernet subnet as the eBase. If the eBase is connected to a hub (or router), connect the host workstation to an available port on the same hub.

2.On your host workstation, open the web browser.

3.In the Address line, type the IP address assigned to the eBase, see Displaying the eBase and Terminal IP Address on page 14. Press ENTER.

4.A login prompt displays on the host workstation. Enter the user name <Admin> and default login password <Dolphin>.

Note: The user name and password are case-sensitive. For information on how to change the password, see page 18.

16