Manuals / Brands / Computer Equipment / Laptop / Honeywell / Computer Equipment / Laptop

Honeywell 9700 USB Communication, Setting Up and Connecting the Dolphin Terminal to the eBase, Plug the power cord into the power adapter

1 32

Download 32 pages, 1.8 Mb

USB Communication

Dolphin terminal’s support USB communication out of the box. The eBase also supports USB communications using the USB port located on the back panel of the eBase. The eBase acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB of the host workstation. Using a standard USB cable, the ebase’s USB interface allows the Dolphin terminal to communicate with a host workstation.

Setting Up and Connecting the Dolphin Terminal to the eBase

1.Plug the power cord into the power adapter.

2.Plug the power connector cable into the power connector on the back of the eBase.

3.Plug the A/C power cord into a standard wall outlet. The COMM LED flashes red.

4.Plug the USB communication cable into the USB port on the back of the eBase.

Note: The Dolphin terminal should always be removed from the eBase when connecting or disconnecting the USB cable.

5.Connect the other end of the USB cable to the host workstation. The COMM LED changes to steady green.

6.Insert the Dolphin terminal in the eBase terminal well. The DOCK LED illuminates green.

7.The Dolphin terminal activates and automatically opens ActiveSync to establish a connection. The COMM LED flashes green.

20

Contents

Page Page Introduction Unpacking the eBase Software Requirements Applications on the Dolphin Terminal Hardware Overview Front Panel AUX Battery LED Back Panel on page This color means… Orange USB Communication Back Panel USB Port RJ45 Ethernet Port terminal Network activity DC Power Jack Bottom Panel Power Charging the Main Battery in the Terminal Ethernet Communication Setting up the eBase Connecting the Dolphin Terminal to the eBase 3.Remove the check from the box next to “Synchronize all PCs using this connection”. Tap OK . Tap 4.Insert a Dolphin terminal into the terminal well. The DOCK LED lights green 5.On the Dolphin terminal, tap Start > Power Tools Troubleshooting DeviceConfig and RASMan Settings Modifying the DeviceConfig.exm ActiveSync Setting Modifying the RASMan AutoActiveSync Setting AutoRun RASMan Configuring the Network Accessing the eBase Cradle Manager from a Host Workstation 5. The Cradle Manager window opens Changing the Password Changing the Dynamic Network Settings Changing the Static Settings USB Communication Setting Up and Connecting the Dolphin Terminal to the eBase Switching from an Ethernet to USB ActiveSync Connection Restoring the eBase Factory Defaults Upgrading the eBase Firmware Using the Cradle Manager to Upgrade the eBase Firmware 3.On your host workstation, open the web browser In the Address line, type the IP address assigned to the ebase 5.Enter the user name <Admin> and default login password <Dolphin 6.The Cradle Manager window appears 7.In the Cradle Manager window, check the box next to Firmware upgrade 8.Enter the IP address of the server in the TFTP Server IP Address field Enter the IP address of the server in the field 9.Under File Name, enter the eBase firmware upgrade file name 10.Click Apply Mounting Using the DIN Rail Technical Assistance Limited Warranty Disclaimer Trademarks Patents Page Page Honeywell Scanning & Mobility