Honeywell 9700 Restoring the eBase Factory Defaults, Switching from an Ethernet to USB ActiveSync Connection, Menu > Connections, Select the check box next to

8.The connection icon in the Dolphin’s navigation bar

changes from x to it indicate a successful connection. The eBase can now transfer data between the terminal and the host device.

Switching from an Ethernet to USB ActiveSync Connection

If you have trouble switching from Ethernet to USB ActiveSync mode, then RASMan may have disabled ActiveSync. Take the following steps to recover ActiveSync.

1.Remove the Dolphin terminal from the eBase.2.Connect the USB cable to the host workstation and then the eBase.3.On the Dolphin terminal, tap Start > ActiveSync >Menu > Connections...

4.Select the check box next to, “Synchronize all host workstation's using this connection.”

5.Choose USB from the drop down menu.6.Tap OK on the Navigation bar to exit the ActiveSync applet.

7.Insert the terminal in the terminal well. ActiveSync automatically initializes synchronization.

Restoring the eBase Factory Defaults

To return the eBase to the factory defaults:1. Unplug the power cable on the eBase.

21