Honeywell 9700 Troubleshooting, navigation bar changes from xto

7.When the connection is established between the Dolphin terminal and the eBase, the terminal plays a sound, and the COMM LED on the eBase lights green. The connection icon in the Dolphin’s

navigation bar changes from x to .

8.Upon connection, the Dolphin terminal shares the eBase IP address. This IP address can be used by any application on the Dolphin terminal.

9.When you disable RASMan or remove the terminal from the eBase, the terminal plays a sound and the

disconnected icon x appears in the Navigation bar. The COMM LED on the ebase lights orange.

Note: A soft or hard reset of the terminal disables RASMan and the Ethernet connection. Tap Start > Power Tools > RASMan to restart the program and restore the connection.

To start RASMan automatically after each soft or hard reset, enable the RASMan Program section of the Autorun.exm file (see AutoRun RASMan on page 15).

Troubleshooting

If the COMM LED lights red while browsing a web page, refresh the page and RASMan will automatically reconnect and the LED light green.

13