Manuals / Brands / Computer Equipment / Laptop / Honeywell / Computer Equipment / Laptop

Honeywell 9700 6.The Cradle Manager window appears, Displaying the eBase and Terminal IP Address, 3.On your host workstation, open the web browser

1 32

Download 32 pages, 1.8 Mb

2.Connect the host workstation Ethernet cable to a port on the same Ethernet subnet as the eBase. If the eBase is connected to a hub (or router), connect the host workstation to an available port on the same hub.

3.On your host workstation, open the web browser.

4.In the Address line, type the IP address assigned to the ebase, see Displaying the eBase and Terminal IP Address on page 14. Press ENTER.

5.Enter the user name <Admin> and default login password <Dolphin>.

Note: The user name and password are case-sensitive. For information on how to change the password, see page 18.

6.The Cradle Manager window appears.7.In the Cradle Manager window, check the box next to Firmware upgrade.

Contents

Page Page Introduction Unpacking the eBase Software Requirements Applications on the Dolphin Terminal Hardware Overview Front Panel AUX Battery LED Back Panel on page This color means… Orange USB Communication Back Panel USB Port RJ45 Ethernet Port terminal Network activity DC Power Jack Bottom Panel Power Charging the Main Battery in the Terminal Ethernet Communication Setting up the eBase Connecting the Dolphin Terminal to the eBase 3.Remove the check from the box next to “Synchronize all PCs using this connection”. Tap OK . Tap 4.Insert a Dolphin terminal into the terminal well. The DOCK LED lights green 5.On the Dolphin terminal, tap Start > Power Tools Troubleshooting DeviceConfig and RASMan Settings Modifying the DeviceConfig.exm ActiveSync Setting Modifying the RASMan AutoActiveSync Setting AutoRun RASMan Configuring the Network Accessing the eBase Cradle Manager from a Host Workstation 5. The Cradle Manager window opens Changing the Password Changing the Dynamic Network Settings Changing the Static Settings USB Communication Setting Up and Connecting the Dolphin Terminal to the eBase Switching from an Ethernet to USB ActiveSync Connection Restoring the eBase Factory Defaults Upgrading the eBase Firmware Using the Cradle Manager to Upgrade the eBase Firmware 3.On your host workstation, open the web browser In the Address line, type the IP address assigned to the ebase 5.Enter the user name <Admin> and default login password <Dolphin 6.The Cradle Manager window appears 7.In the Cradle Manager window, check the box next to Firmware upgrade 8.Enter the IP address of the server in the TFTP Server IP Address field Enter the IP address of the server in the field 9.Under File Name, enter the eBase firmware upgrade file name 10.Click Apply Mounting Using the DIN Rail Technical Assistance Limited Warranty Disclaimer Trademarks Patents Page Page Honeywell Scanning & Mobility