INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
A S S E M B LY STEP 2 |
|
| CONSOLE MAST |
BOLT (A) | CONSOLE MAST BOOT |
| |
SPRING WASHER (B) | TOP BACK COVER |
| |
FLAT WASHER (C) |
|
TOP FRONT COVER |
|
| CONSOLE WIRE |
MAIN FRAME |
|
A)Open HARDWARE BAG FOR STEP 2.
B)Carefully pull the CONSOLE CABLE through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C)Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
D)Attach the TOP FRONT COVER, followed by the TOP BACK COVER and snap them together.
E)Slide CONSOLE MAST BOOT down to seal the console mast hole.
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) |
20 mm | 18 mm | 20 mm |
Qty: 4 | Qty: 4 | Qty: 4 |
LIMITED WARRANTY
8
