Horizon Fitness EX-76 manual A S S E M B Ly Step, Assembly, Important Precautions Introduction

INTRODUCTION IMPORTANT PRECAUTIONS

A S S E M B LY STEP 5

FOOT PAD

A S S E M B LY STEP 6

LINK ARM

U-BRACKET

CONNECTING TUBE

PEDAL ARM

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

LINK ARM

WASHERS (H) SCREWS (G)

PEDAL ARM

LINK ARM

U BRACKET
SPLIT TEFLON	BOLT (L)
WASHER (J)

INSERT

SPACER

THIS

DIRECTION

CONNECTING TUBE

SPACER (I) FLAT WASHER (K)

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY

12

A)Open HARDWARE BAG FOR STEP 5.

B)Attach FOOT PAD to LINK ARM using 4 SCREWS (G) and 4 WASHERS (H).

C)Repeat on other side.

HARDWARE BAG FOR STEP 5 CONTENTS :

SCREW (G)	WASHER (H)
12 mm	18 mm
Qty: 8	Qty: 8

A)Open HARDWARE BAG FOR STEP 6.

B)Align the U-BRACKET on the RIGHT LOWER LINK ARM with the CONNECTING TUBE on the RIGHT PEDAL ARM.

C)Slide the SPACER (I) through the U-BRACKET and the CONNECTING TUBE until it can no longer rotate.

D)Insert 2 SPLIT TEFLON WASHERS (J) between the CONNECTING TUBE and the U-BRACKET.

E)Secure the joint with a FLAT WASHER (K) and BOLT (L).

F)Repeat on the other side.

HARDWARE BAG FOR STEP 6 CONTENTS :
		SPACER (I)
		71 mm axis
		Qty: 2
SPLIT TEFLON WASHER (J)	FLAT WASHER (K)	BOLT (L)
28 mm	35 mm	15 mm
Qty: 4	Qty: 2	Qty: 2

13

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

EX-76_Rev.1.4.indd 12-13 6/22/07 9:05:30 AM