INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLYBEFORE YOU BEGIN
A S S E M B LY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
WARNING
There are several areas during the assembly process of an elliptical that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.
SPEAKERS |
|
DISPLAY |
|
LEFT HANDLEBAR |
|
PULSE GRIP | CONSOLE |
| |
| RIGHT HANDLEBAR |
CONSOLE MAST |
|
CONSOLE MAST BOOT | HANDLEBAR COVERS |
| |
BOTTLE HOLDER | POWER CORD SOCKET |
TOP CAP | POWER SWITCH |
| ELBOW COVER |
| FRONT STABILIZER TUBE |
PIVOTING FOOT PAD
PEDAL ARM
LOWER LINK ARM
TOOLS INCLUDED | PARTS INCLUDED |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is located on the mast boot.
enter your serial number and model name in the boxes below:
SERIAL NUMBER:
MODEL NAME:
5mm Allen Wrench
Phillips Screw Driver
13/15mm Flat Wrench
5mm T Wrench
1 Console | 7 | Hardware Bags | ||
1 Console Mast | 2 | Handlebar Cover Sets | ||
1 | Left Handlebar | 2 | Elbow Cover Sets | |
1 | Right Handlebar | 2 | Pedal Arm Covers | |
2 | Lower Link Arms | Audio Adaptor Cable | ||
2 | Pivoting Foot Pads | 2 | Pedal Arms | |
Console Mast Boot | 1 | Front Stabilizer Tube |
Power Cord
Top Cap
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING MAINTENANCE GUIDELINES
LIMITED WARRANTY
*Refer to the serial number and model name when calling for service.
*Also enter this serial number on your Warranty Card.
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
6/22/07 9:05:02 AM |