INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
14
A S S E M B LY STEP 7 |
|
|
| LOWER LINK ARM | LOWER |
|
| HANDLEBAR |
| SPACER RINGS (N) |
|
| SPACER (O) | |
| LOWER HANDLEBAR | |
| NUT (Q) | BOLT (M) |
| WASHER (P) | |
| SPACER (O) |
|
LOWER LINK ARM | SPACER RINGS (N) |
|
|
| |
A)Open HARDWARE BAG FOR STEP 7.
B)Slide SPACER (O) into LOWER LINK ARM.
C)Place 2 SPACER RINGS (N) on both sides of SPACER (O). While holding
SPACER RINGS (N), slide LOWER LINK ARM into bottom end of LOWER HANDLEBAR.
D)Insert 1 BOLT (M) into LOWER HANDLEBAR and secure using 1 WASHER (P) and 1 NUT (Q).
E)Repeat on other side.
HARDWARE BAG FOR STEP 7 CONTENTS : | BOLT (M) | SPACER (O) |
| ||
| 45 mm | |
| Qty: 2 | |
| Qty: 2 | |
|
|
SPACER RING (N) | WASHER (P) | NUT (Q) | |
18 mm | 8 mm | ||
Qty: 4 | |||
Qty: 2 | Qty: 2 | ||
|
A S S E M B LY STEP 8
INSIDE ELBOW COVER
SCREW (S)
LINK ARM
OUTSIDE ELBOW COVER
SCREW (R)
A)Open HARDWARE BAG FOR STEP 8.
B)Attach the OUTSIDE ELBOW COVER to the LINK ARM using 1 SCREW (R).
C)Carefully hold the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER. Tighten the INSIDE ELBOW COVER to the LINK ARM using 1 SCREW (R).
D)Tighten 1 SCREW (S) at the front of the OUTSIDE ELBOW COVER.
E)Repeat on other side.
HARDWARE BAG FOR STEP 8 CONTENTS :
SCREW (R) | SCREW (S) |
8 mm | 10 mm |
Qty: 4 | Qty: 2 |
15
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
6/22/07 9:05:50 AM |
