u s e r fav o r i t e keys
The user favorite keys allow up to two programs and program settings to be saved into memory. Using a favorite key enables you to begin your favorite program quickly. To set a user favorite key, follow the steps listed in the “setting favorite keys” section.
SETTING FAVORITE KEYS
1)Press and hold the favorite 1 or favorite 2 key for five seconds until you hear three beeps. The LED inside the favorite key will be flashing.
*NOTE: The favorite keys cannot be programmed if you are already in a program.
2)Select preferred program using the program keys and press enter. *note: The custom program (P8) cannot be saved into a favorite key.
3)For programs P1 through P6, set level and time using the +/- keys and press enter after setting each value. For P7 (THR Zone), set target heart rate and time using the +/- keys and press enter after setting each value.
4)After you have saved the last value (time) into memory by pressing enter in step 3, the favorite key programming is complete and the LED inside the favorite key will no longer flash. Press start to begin the program you just set.
*Note: At any time, you may reset a favorite key with a new program or different program settings by following the four steps listed above.
USING FAVORITE KEYS
1)After you have programmed a favorite key as listed in the “SETTING FAVORITE KEYS” section, you may use the favorite key. Press the desired favorite 1 or favorite 2 key.
2)Press start to begin the program.
*NOTE: The favorite 1 and favorite 2 keys may only be used before starting a program. The keys will not function while in a program.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
23
LIMITED WARRANTY
