INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
P R E - A S S E M B LY
Disassemble box and remove the cardboard packaging that is not beneath the treadmill. Do not attempt to lift the treadmill at this time. Remove plastic wrap from console masts.
note: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.
A S S E M B LY STEP 1
HARDWARE BAG 1 CONTENTS :
BOLT (A) | FLAT WASHER (B) | SPRING WASHER (C) |
65 mm | 16 mm | 16 mm |
Qty: 4 | Qty: 4 | Qty: 4 |
LEAD WIRE | CONSOLE CABLE |
|
TREADMILL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
CONSOLE MAST FLAT WASHER BOLT (A)
SPRING WASHER MAIN FRAME
A | Open HARDWARE BAG 1. |
B | Pull LEAD WIRE through RIGHT CONSOLE |
| MAST to drag upward. |
C | Place left console mast into upright |
| position. Be sure to hold the console mast |
| firmly, as it will not stay in the upright |
| position on its own. |
D | Use bolts (A), 2 SPRING WASHERS (B), |
| and 2 FLAT WASHERS (C) to attach console |
| mast to the MAIN FRAME. |
ERepeat on the right side.
LIMITED WARRANTY
