10)Open the water supply line shut-off valve.

11)Turn on the power supply, move the power switch to the "ON" position, then replace the front panel in its correct position to engage the door switch. Move the control switch to the "ICE" position.

12)Allow the icemaker to fill for two minutes.

13)Move the control switch to the "OFF" position.

14)Remove the front panel and check for water leaks.

15)Move the control switch to the "DRAIN" position. Engage the door switch and

make sure that water is draining and that there are no water leaks around the hose connection.

16)Move the control switch to the "OFF" position and disengage the door switch.

17)Replace the panels in their correct positions.

18)Move the control switch to the "ICE" position to start the automatic ice making process.

L.Removal and Replacement of Dispensing System

1.Dispensing Auger and Agitator

1)Move the control switch to the "OFF" position, then turn off the power supply. Remove the front and top panels, then move the power switch to the "OFF" position.

2)Remove the front cover of the storage bin.

3)Remove the thumbscrews from the vertical plane, then loosen the thumbscrews from the horizontal plane of the motor bracket. Slide the motor back.

Note: Hold the dispensing auger/agitator to prevent it from dropping when sliding back the motor. See Fig. 5.

4)Replace the dispensing auger/agitator with the new one.

5)Assemble the removed parts in the reverse order of which they were removed.

6)Move the power switch to the "ON" position, then replace the panels in their correct positions.

7)Turn on the power supply, then move the control switch to the "ICE" position to start the automatic icemaking process.

2.Dispensing or Agitating Motor

1)Move the control switch to the "OFF" position, then turn off the power supply. Remove the front and top panels, then move the power switch to the "OFF" position.

2)Remove the storage bin front panel.

3)Remove the thumbscrews from the vertical plane, then loosen the thumbscrews from the horizontal plane of the motor bracket. Slide the motor back.

Note: Hold the dispensing auger/agitator to prevent it from dropping when sliding back the motor. See Fig. 5.

4)Remove the thumbscrews from the horizontal plane of the motor bracket.

5)Remove the motor from the bracket.

61

Page 60 Page 62
Page 61
Image 61
Hoshizaki DCM-500BWH-OS, DCM-500BAH-OS Removal and Replacement of Dispensing System, Dispensing Auger and Agitator
Page 60 Page 62

DCM-500BWH, DCM-500BAH, DCM-500BWH-OS, DCM-500BAH-OS specifications

The Hoshizaki DCM-500BWH-OS, DCM-500BWH, DCM-500BAH, and DCM-500BAH-OS are advanced ice makers designed to meet the needs of busy commercial environments. Hoshizaki is a renowned manufacturer known for producing high-quality refrigeration and foodservice equipment, and their DCM series of ice makers exemplifies this commitment to excellence.

One of the main features of the DCM-500 series is its ability to produce a significant amount of ice, ideally suited for restaurants, bars, and hotels. With a production capacity of up to 500 pounds of nugget ice per day, these units provide an efficient solution for establishments that require a steady supply of ice.

The nugget ice produced by the DCM-500 series is not only soft and chewable but also retains the cold temperature longer, making it perfect for beverages. This appealing characteristic of nugget ice caters to growing customer preferences for premium ice options.

These models also incorporate advanced ice-making technology, ensuring consistent quality. The DCM-500BWH-OS and DCM-500BAH-OS variants feature a self-contained design that makes installation simple and efficient, providing enhanced portability that makes them versatile for different locations within a commercial space.

The DCM-500BWH and DCM-500BAH models are equipped with features like a built-in ice bin that allows for storage convenience. The ice bins have a substantial holding capacity, reducing the frequency of refills and improving overall operation efficiency.

Additionally, the DCM-500 series is designed with energy efficiency in mind. Integrated with modern refrigeration systems, these ice makers comply with energy-saving standards, helping to reduce operational costs. User-friendly controls allow for easy adjustment and monitoring, ensuring that operators can manage their ice production without hassle.

Moreover, the robust construction materials used in these models increase durability, making them suitable for high-demand environments. Features such as easy-to-clean surfaces and self-diagnostic systems further optimize maintenance, ensuring prolonged performance without significant downtime.

Overall, the Hoshizaki DCM-500BWH-OS, DCM-500BWH, DCM-500BAH, and DCM-500BAH-OS ice makers are excellent choices for businesses seeking reliable and high-capacity ice production. Their advanced features, energy efficiency, and user-friendly operation make them a valuable addition to any commercial kitchen or bar setup.
Top Page Image Contents