Manuals / Hoshizaki / Kitchen Appliance / Ice Maker

Hoshizaki KM-151BWH, KM-101BAH Fig, Bin Drain Outlet, Condenser Water, 3/4” FPT, Outlet 1/2” FPT

Models: KM-151BAH KM-151BWH KM-61BAH KM-101BAH

1 22

Download 22 pages 62.9 Kb

Page 14

Bin Drain Outlet

KM-151BWH

Bin Drain Outlet	Condenser Water
3/4” FPT	Outlet 1/2” FPT	Condenser Water
		Inlet 1/2” FPT

Icemaking Water Supply

Inlet 1/2” FPT

	Shut-off Valve
Two-inch (5 cm)
air gap	Drain Valve
Separate piping to approved drain.	Drain Valve
Leave a two-inch (5 cm) vertical air	Drain Valve
gap between the end of each pipe	Shut-off Valve
and the drain.
Floor
Drain

Fig. 5

11

Image 14

Hoshizaki KM-151BWH Fig, Bin Drain Outlet, Condenser Water, 3/4” FPT, Outlet 1/2” FPT, Inlet 1/2” FPT, Drain Valve

Contents

KM-61BAH KM-101BAH KM-151BAH KM-151BWH INSTRUCTION MANUALSELF-CONTAINEDCRESCENT CUBER L1M006102Peachtree City, GA Complete and detailed explanation of the problemHOSHIZAKI AMERICA, INC 618 Highway 74 South Attn: Hoshizaki Technical Support DepartmentCONTENTS PAGEI. Speciﬁcations A. Nameplate Rating B. Dimensions/Connections 1. KM-61BAH2. KM-101BAH Unit: mm inches3. KM-151BAH Unit: mm inches4. KM-151BWH Unit: mm inchesB. How to Remove Panels - See Fig. Fig. C. Location THIS APPLIANCE MUST BE GROUNDED E. Set UpD. Electrical Connection Fig. Fig.F. Water Supply and Drain Connections - See Fig. Fig. Drain lines should not be piped directlyCondenser Water Fig.Bin Drain Outlet 3/4” FPTG. Final Checklist H. Startup 1.Cleaning Procedure III. Cleaning and Maintenance InstructionsA. Cleaning Fig. 7Same as step16Wash the Bin Control Switch, Water Tank, Float Switch, Cube Guide, Silicone Hose and Overﬂow Pipe by using a nylon scouring pad, brushes and the cleaning solution. In addition to the removed parts, also wash the bin liner and Bracket L R with the solution Fig.2. Storage Bin and Scoop B. Maintenance1. Exterior Panels 4. Condenser C. Preparing the Icemaker for Long Storage3. Air Filter 2.Drain the potable Water Tank