Ensure proper ground exists before use
PREFERRED METHOD

3 ELECTRICAL CONNECTIONS (on some models)

Electrical Requirements

120-volt, 60 Hertz, properly grounded branch circuit protected by a 15-amp or 20-amp circuit breaker or time delay fuse.

Extension Cord Cautions

Because of potential safety hazards associated with certain conditions, we strongly recommend against the use of an extension cord. However, if you still elect to use an extension cord, it is absolutely necessary that it be a UL-listed,

3-wire grounding-type appliance extension cord and that the current carrying rating of the cord in amperes be equivalent to, or greater than, the branch circuit rating.

Grounding

IMPORTANT—(Please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three-prong grounding

wall receptacle to minimize the

possibility of

electric shock

hazard from

this appliance.

The customer should have the wall receptacle and circuit checked by a

qualified electrician to make sure the receptacle is properly grounded.

Where a standard two-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded three-prong wall receptacle.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

AUsage Situations where Appliance Power Cord will be Disconnected Infrequently.

An adapter may be used only on a 15-amp circuit. Do not use an adapter on a 20-amp circuit. Where local codes permit, a TEMPORARY CONNECTION may be made to a properly grounded two-prong wall receptacle by the use of a UL-listed adapter, available at most hardware stores. The larger slot in the adapter must be aligned with the larger slot in the wall receptacle to provide proper polarity in the connection of the power cord.

TEMPORARY

METHOD

(Adapter plugs not permitted in Canada.)

Align large prongs/slots

Ensure proper ground exists before use

CAUTION: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded through the house wiring. The customer should have the circuit checked by a qualified electrician to make sure the receptacle is properly grounded.

When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen, DO NOT USE the appliance until a proper ground has again been established.

(continued next page)

29

Page 29
Image 29
Hotpoint RGB506 installation instructions Electrical Requirements, Extension Cord Cautions, IMPORTANT-Please read carefully

RGB506 specifications

The Hotpoint RGB506 is a standout choice for consumers seeking a reliable and efficient range cooker that combines both style and functionality. This appliance epitomizes modern kitchen design while ensuring cooking needs are met with ease.

One of the key features of the Hotpoint RGB506 is its double oven design, offering a total capacity that accommodates family meals and entertaining guests effortlessly. The primary oven boasts a generous space of 70 liters, providing ample room for roasts, casseroles, and other culinary creations. The secondary oven adds an additional 38 liters of cooking space, ideal for baking or keeping dishes warm without occupying the main oven’s area.

In terms of cooking technology, the Hotpoint RGB506 is equipped with fan-assisted cooking, ensuring even distribution of heat throughout the oven. This technology allows users to cook multiple dishes at once without worrying about flavors mixing or uneven cooking results. Additionally, the double oven setup allows for multiple cooking methods; the main oven can be utilized for traditional cooking while the other can function as a grill, broadening culinary possibilities.

Another remarkable feature is the hob area, which includes four gas burners. These burners come with various power outputs, allowing for precise temperature control suited to different cooking styles, from gentle simmering to rapid boiling. The cast iron supports on the burners ensure durability and stability, providing a professional touch to home cooking.

Safety and convenience are paramount, and the RGB506 addresses these with its flame failure safety device. This feature automatically cuts off the gas supply if the flame goes out, offering peace of mind. The oven is also fitted with an easy-to-clean enamel interior, which simplifies maintenance and enhances the longevity of the appliance.

For those who appreciate design, the Hotpoint RGB506 features a sleek and modern aesthetic that can complement a variety of kitchen styles. Its clean lines, stainless steel finish, and ergonomic controls create a sophisticated yet accessible cooking environment.

In summary, the Hotpoint RGB506 is a versatile and efficient range cooker that combines ample cooking space, advanced technology, and a commitment to safety and ease of use. Its thoughtful design and functionality make it an excellent addition to any kitchen, whether for everyday cooking or special occasions.