IMPORTANT INFORMATION: Before selecting an independent drying
programme, ensure the mains button is in the ‘OFF’ position.
Independent Dry Programme
Remove wet laundry
1 and dosing ball (if used) until the correct ‘Drying Weight Load’ (page 14) is left in the drum.
Select optional wash &
4 dry features (pages 15 - 16), you will hear a beep and the Infobubble™ will display the selection.
2 Close door by applying pressure at the
2 o’clock position.
Press ‘START’, the door
5 will lock and the 
symbol will appear in the Infobubble™ throughout the wash & dry programme.
3 Switch ‘ON’, a coloured band indicates selection. The Infobubble™ will display ’Select Programme’
symbol will disappear and the door can be opened. Switch ‘OFF’ after use.
WARNINGS
●If your appliance is not permanently plumbed in, turn on the cold water supply to the appliance and hook the drain hose over the sink to enable the condensing action to work.
●The dryer is intended for use only where water is used for the cleaning process.
●Be careful not to touch the drum at the top as this area gets hot during drying.
●On no account should liquid fabric conditioner be added during the drying process.
●Misuse of the dryer may create a fire hazard.
11
