2. Remove Transit Brackets...
Your appliance is fitted with internal transit brackets (Fig 1) which prevents damage to the appliance during transit. Remove parts (Fig 2) following the instructions below.
Note: It is normal for the door seal to look creased, it will not affect its use.
Front Transit Bracket
Fig 1 | Rear Transit Bracket |
WARNINGS
● Before using appliance, remove transit brackets, clamps and screws Retain parts for future transportation.
Fig 2
1 Remove 3 screws from back of work top lid, retain.
3 Remove 4 screws and rear transit bracket, retain.
5 Slide and push work top lid into position, ensuring front edge is correctly located into console.
2 From rear of appliance, grip sides of work top lid, lift, slide and pull towards you.
4 Remove 3 screws and front transit bracket, retain.
6 Replacescrews. work top lid and 3
●After removing the packaging from the machine, ensure that the polystyrene pyra- mid (shown below) has come away from the underside of the machine, with the polystyrene base.
If it has not come away, remove it by tilting the machine backwards until the pyramid can be seen and then remove.
Remember you may be charged for a service call if a problem with your appliance is caused by incorrect installation or misuse.
5
