Hotpoint WD71 Variable Temp, Variable Rinse, Variable Spin, Drying Prog./Drying Time

Variable Temp.

Press Button	Action	Infobubble™ Display
x 1 & Hold	Reduce programmed temperature in 5 C intervals
	to a minimum of 30 C
x 2	Cancel

Variable Rinse

●Not available with programme ‘F’.

Press Button	Action	Infobubble™ Display
x 1	Add a rinse for sensitive skin
x 2	Delete a rinse to save time and water
x 3	Return to normal programme setting

Variable Spin

Press Button	Action	Infobubble™ Display
x 1	Display existing programme spin speed.
x 2 & Hold	Reduce spin speed by 100rpm intervals
	to 400rpm or ‘0’ (no spin).
x 3	Return to normal programme setting.

Drying Prog./Drying Time

●Not available with programme ‘F’.

Press Button	Action	Infobubble™ Display
x 1	Selects low heat programme.
x 2	Selects full heat programme.

Note: To increase drying time by 10 minute increments up to 120 minutes, press and hold button.

Start, Buzzer/Time Delay

Press Button	Action	Infobubble™ Display
x 1 & Hold	Buzzer -	Lets you know when the programme has
		finished or when Rinse Hold is activated.

Time Delay - Gives you the option to delay your wash programme from 1 to 18 hours.

Note: When the button is released the programme will start automatically and the Infobubble™ will display ‘Starting Programme’.

Cancel Button

To start the selection again, press and hold the cancel button for a few seconds, all settings displayed will disappear and the Infobubble™ will display ‘Select Programme’.

Note: If pressed when setting ‘Time Delay’ or when time delay is active, time delay is cancelled but the selected wash programme and optional wash features will remain, the Infobubble™ will display these. Press start to proceed with the programme.

16