Hotpoint WD71 Changing Main Wash Indicator, Dispensing Liquid Detergent, Using a Dosing Ball

WARNING

●Do not dispense detergent tablets from the dispenser drawer. Refer to detergent manufacturer’s instructions.

●Do not use a dosing ball to dispense detergent when using a wash and auto dry programme.

Changing the

Main Wash

Indicator

The Main Wash Indicator has been fitted, ready to dispense ‘Powder’ detergent only.

1 Pull drawer out until it reaches its stop.

Dispensing Liquid Detergent

	Max.– 150ml.
	100ml.
	50ml.
Fig 1	Fig 2

Refer to detergent manufacturer’s instructions for dosage and pour liquid into the compartment (Fig 1).

Note: The ‘Liquid Detergent’ Main Wash Indicator features 3 lines which represent the dosage of liquid to be used (Fig 2). We recommend that you do not exceed the maximum limit of 150ml.

Dispensing

Powder

Detergent

To achieve optimum wash results we recommend that you use the detergent manufacturer’s dispensing

cup to dispense no more than

2 Press down on button to release drawer latch, remove drawer.

300 ml of powder (Fig 3).

Dispensing

Fabric

Conditioner

Fig 3

3 Lift ‘Powder’ indicator out of slots, rotate and reposition for ‘Liquid’ ensuring it is secure.

Pour fabric conditioner into compartment (Fig 4). We recommend that you do not exceed the maximum level indicated.

Fig 4

Using a Dosing Ball

4 Re-locate drawer and push firmly back into place.

Fig 5

To obtain claimed energy label

wash performance for a 60°C cotton wash, dispense powder detergent in a dosing ball, placed in an upright position in the centre of the wash load (Fig 5).

To receive a ‘FREE’ dosing ball, phone: UK 0800 243 131 or Republic of Ireland:

1800 386 386

18