Installation Instructions
IMPORTANT INFORMATION:
●Do not plug in and switch appliance on at the mains until installation is complete.
●You may be charged for a service call if a problem with your appliance is caused by incorrect installation or misuse.
Follow these 5 steps for a trouble free installation:
1.Choose a Location...
2.Remove Transit Brackets...
3.Connect to the Water Supply...
4.Connect to a Drainage System...
5.Adjust the Feet...
1.Choose a Location...
The choice of location for your appliance will influence its performance.
●Position where possible on a solid floor. Vibration may occur with a wooden floor.
●Take care with vinyl floor coverings. The weight of the appliance may cause indentations in some vinyl floor coverings.
●For your safety and to comply with IEE regulations, you should not install your appliance in a bath or shower room. Seek professional advice if you wish to do so.
●Ensure sufficient space is allowed for the appliance. The dimensions should be a minimum of 600 mm wide, 600 mm deep and 900 mm high.
●Ensure the electrical socket and water taps are easily accessible and that the water supply can be isolated if necessary.
4
