Manuals / HP / Computer Equipment / Laptop

HP 13-a010dx x360, 13-a041ca x360, 13-a040ca x360 Open the computer, Remove the keyboard/top cover

Models: 13-a019wm x360 13-a072nr x360 13-a013cl x360

1 86
Download 86 pages 20.56 Kb
Page 44
Image 44
7.Open the computer.

7.Open the computer.

CAUTION: Do not completely separate the keyboard/top cover from the bottom cover in the next step. There are 2 ribbon cables connecting the keyboard/top cover to the system board that can be damaged if too much separation is achieved.

8.Lift the front edge (1) of the keyboard/top cover until it (2) separates from the bottom cover.

9.Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the system board.

10.Release the ZIF connector (2) to which the keyboard cable is attached, and then disconnect the keyboard cable from the system board.

11.Remove the keyboard/top cover.

Reverse this procedure to install the keyboard/top cover.

36

Chapter 5 Removal and replacement procedures

Page 43 Page 45
Page 44
Image 44
HP 13-a010dx x360, 13-a041ca x360 Open the computer, Remove the keyboard/top cover, Removal and replacement procedures
Page 43 Page 45