HP 13-a040ca x360, 13-a041ca x360, 13-a013cl x360, 13-a019wm x360, 13-a012dx x360 Display assembly

Remove the power button board:

1.Release the ZIF connector (1) to which the power button board cable is attached, and then disconnect the power button board cable from the system board.

2.Remove the Phillips PM2.4×3.7 screw (2) that secures the power button board to the bottom cover.

3.Remove the power button board (3) and cable.

Reverse this procedure to install the power button board.

Display assembly

NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections.

Before removing the display assembly, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the keyboard/top cover (see Keyboard/top cover on page 34).

5.Disconnect the battery cable from the system board (see Battery on page 38).

Display assembly 47