Manuals / HP / Computer Equipment / Laptop

HP 13-a013cl x360, 13-a041ca x360 Remove the display assembly, Removal and replacement procedures

Models: 13-a019wm x360 13-a072nr x360 13-a013cl x360

1 86
Download 86 pages 20.56 Kb
Page 56
Image 56
Remove the display assembly:

Remove the display assembly:

1.Release the ZIF connector (1) to which the display panel cable is attached, and then disconnect the display panel cable from the system board.

2.Disconnect the WLAN antenna cables (2) from the terminals on the WLAN module.

Manual backgroundManual backgroundManual backgroundManual background NOTE: The WLAN antenna cable labeled “1” connects to the WLAN module “Main” terminal labeled “1”. The WLAN antenna cable labeled “2” connects to the WLAN module “Aux” terminal labeled “2”.

3.Release the ZIF connector (3) to which the display TouchScreen cable is attached, and then disconnect the display TouchScreen cable from the system board.

4.Release the display TouchScreen cable from the routing clip (4) built into the bottom cover.

5.Remove the three Phillips PM2.5×5.7 screws (1) and the Phillips PM2.5×3.3 screw (2) that secure the display assembly to the bottom cover.

48

Chapter 5 Removal and replacement procedures

Page 55 Page 57
Page 56
Image 56
HP 13-a013cl x360, 13-a041ca x360, 13-a040ca x360 manual Remove the display assembly, Removal and replacement procedures
Page 55 Page 57