HP 13-a081nr x360, 13-a041ca x360, 13-a040ca x360, 13-a013cl x360, 13-a019wm x360 manual Hard drive

3.Detach the audio/USB board cable (3) from the battery. (The audio/USB board cable is attached to the battery with double-sided adhesive.)

4.Remove the two PM2.4×5.7 screws (4) that secure the battery to the bottom cover.

5.Lift the right side of the battery (5) until it rests at an angle.

6.Remove the battery (6) by sliding it up and to the right.

Reverse this procedure to install the battery.

Hard drive

NOTE: The hard drive spare kit does not include the hard drive bracket or hard drive connector adapter. The hard drive bracket and hard drive connector adapter are included in the Hard Drive Hardware Kit, spare part number 768020-001.

Description	Spare part number
1-TB, 5400-rpm	762990-005
750-GB, 5400-rpm	752099-005
500-GB, 5400-rpm	683802-006
500-GB, 5400-rpm, Hybrid 8-GB	732000-005

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

Hard drive 39