HP 13-a041ca x360, 13-a040ca x360, 13-a013cl x360, 13-a019wm x360, 13-a012dx x360 Power button board

Remove the speakers:

1.Remove the two Phillips PM2.4×3.7 screws (1) that secure the speakers to the bottom cover.

2.Release the speakers cables from the retention clips (2) built into the bottom cover.

3.Remove the speakers (3).

Reverse this procedure to install the speakers.

Power button board

Description	Spare part number
Power button board (includes cable)	768009-001

Before removing the power button board, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the keyboard/top cover (see Keyboard/top cover on page 34).

5.Remove the battery (see Battery on page 38).

46 Chapter 5 Removal and replacement procedures