HP 13-a048ca x360, 13-a041ca x360, 13-a040ca x360, 13-a013cl x360 manual Power connector cable

d.Release the WLAN antenna cables from the retention clips (4) and channels built into the top edge and right side of the display back cover.

e.Remove the WLAN antenna cables and transceivers.

The WLAN antenna cables and transceivers are included in the Antenna Kit, spare part number 768033-001.

Reverse this procedure to reassemble and install the display assembly.

Power connector cable

Description	Spare part number
Power connector cable	768012-001

Before removing the power connector cable, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the keyboard/top cover (see Keyboard/top cover on page 34).

5.Disconnect the battery cable from the system board (see Battery on page 38).

6.Remove the display assembly (see Display assembly on page 47).

Power connector cable 55