8.If it is necessary to replace the display panel:
a.Remove the six Phillips PM2.5×4.5 screws that secure the display panel to the display enclosure.
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel.
b.Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in front of the display enclosure.
c.Release the adhesive strip (2) that secures the display panel cable connector (3) to the display panel.
Component replacement procedures | 71 |
