
10.If it is necessary to replace the display panel cable:
a.Release the webcam/microphone module cable from the adhesive (1) attached to the display enclosure.
b.Release the display panel cable from the clips (2) and routing channel built into the display enclosure.
c.Remove the display panel cable (3).
The display panel cable is available using spare part number
11.If it is necessary to replace the wireless antenna:
a.Detach the wireless antenna transceivers (1) from the display enclosure. (The wireless antenna transceivers are attached to the display enclosure with
b.Release the wireless antenna cables from the clips (2) and routing channel built into the left, right, and bottom edges of the display enclosure.
Component replacement procedures | 73 |